NTE576
5.0 Ampere Super Fast Rectifier
Features: D Low Forward Voltage Drop D High Current Capability D High Reliability D High Surge Current Capability Maximum Ratings and Electrical Characteristics: (TA = +25C unless otherwise specified. Resistive or inductive load 60Hz. For capacitive load, derate current by 20%.) Recurrent Peak Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V RMS Voltage, VRMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280V DC Blocking Voltage, VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V Average Forward Output Rectified Current, [.375 (9.5mm) lead length at TA = 55C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0A(AV) Peak Forward Surge Current, (8.3ms single half sine-wave superimposed on rated load ) . . . . . . . . . . . . . . . . . . . . 150A(PK) Instantaneous Forward Voltage Drop at 5.0A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25V(PK) Full Load Reverse Current at Rated DC Blocking Voltage TA = +25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0A TA = +100C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50A Maximum Reverse Recovery Time (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35ns Typical Junction Capacitance (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150pF Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150C StorageTemperature Range, TSTG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150C Note 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A. Note 2. Measured at 1MHz and applied reverse voltage of 4.0VDC.
1.000 (25.4) Min
.371 (9.4) Max
.050 (1.27) Dia Max Color Band Denotes Cathode
.250 (6.35) Dia Max
|
